Construct Porcelainco
Order Via WhatsAppOrder Via EmailQuick Overview
Medium Duty
Made in Spain
Description
CONSTRUCT PORCELAINCO Tile Glue
(also referred to as Porcelain Tile Adhesive, High-Bond Tile Glue, or C1TE Cementitious Adhesive for porcelain tiles)
Base:
High-grade Portland cement blended with graded fillers, resins, and performance-enhancing polymers.
Form:
Dry, grey or white powder.
Mixed with water to form a smooth, workable paste.
High Bond Strength:
Designed for porcelain tiles, which are low in porosity and require strong adhesives.
Forms a durable bond with cementitious substrates, concrete, render, screed, and plasterboard.
| Property | Value |
|---|---|
| Classification | C1TE |
| Pot Life | Approx. 4–5 hours |
| Open Time | ≥ 30 minutes |
| Adjustability Time | ≥ 20 minutes |
| Grouting Time | After 24 hours (floor), 8 hours (wall) |
| Coverage | 3.0–5.0 kg/m² (depending on trowel and tile size) |
| Shelf Life | 12 months (unopened) |
Surface Preparation:
Substrate must be clean, dry, structurally sound, and free of dust, oil, and grease.
New concrete must be fully cured.
Prime highly absorbent surfaces as necessary.
Mixing Instructions:
Add CONSTRUCT PORCELAINCO Tile Glue powder to clean water at approx. 6.0–6.5 liters per 25 kg bag.
Mix with a low-speed electric drill until a lump-free, creamy paste is achieved.
Let sit for 5 minutes, then remix briefly before application.
Installation Guidelines:
Apply with a notched trowel, suitable for the tile size.
Press tile firmly into the adhesive bed, twisting slightly to ensure full contact.
Avoid walking on floor tiles for at least 24 hours.
